Layering and combining ; If you have no idea how to start the installation process, you might want to consider layering lights. This is the process of combining lights based on their purpose. The first thing you should do is choose a good task light. Task lighting fixtures can be ceiling downlights or wall sconces. These are great for interior design work that serves a specific purpose. You can place them close to the vanity counter or the mirror. Task lighting will make it easier for you to do a variety of tasks in the bathroom.
So, for example, zone 1 is the wettest location, being around the bath and shower. Zone 2 is slightly less soaking, being just outside the immediate bath, shower and basin areas, and zone 3 is the furthest away from these sources of water. So if you're looking for designer bathroom lighting to create a well lit bath or shower area, look for zone 1 lighting, and for bathroom mirror lights and designer bathroom wall lights, bear in mind you'll need either zone 2 or 3.
Uniform light can be expressed through various bodies, selected according to the size of the bathroom. For a small bath uniform light can be obtained with the help of two bodies of lighting arranged on either side of the mirror, and for a large bath the light may be obtained by using a lightning body affixed to the ceiling, above huge mirrors.
Ambient lighting is another part of light layering. These are usually your typical uplights. They direct light upwards to allow the light to bounce off the ceiling and into the rest of the room. It softens the light and creates a good glow. Next is accent lighting. This is the kind of lighting that will give an additional spark to the lighting of the room. You can choose to dim it or increase the glare depending on your needs.
unique bathroom lights
modern bathroom lights