Now consider your bathroom space. You can try drawing the layout on a piece of paper. Indicate the natural light sources, such as your window and start putting ideas on the paper. Consider the various kinds of lamps available today, and where you can put them in the room. Have a main source installed. You can use this at night when natural daylight is absent. Next would be your secondary source, for your accent lighting. These are the bulbs that you can also use during the day to tie the lighting of the room together.
Bathrooms are characterised, in general, as more restricted areas - they are not always the big, airey rooms we may hope for and, often, do not have natural light. As such, lighting becomes more important than usual. Lighting must be more intense than in the rest of our house, as compared with the needs of the room.
So, for example, zone 1 is the wettest location, being around the bath and shower. Zone 2 is slightly less soaking, being just outside the immediate bath, shower and basin areas, and zone 3 is the furthest away from these sources of water. So if you're looking for designer bathroom lighting to create a well lit bath or shower area, look for zone 1 lighting, and for bathroom mirror lights and designer bathroom wall lights, bear in mind you'll need either zone 2 or 3.
Ambient lighting is another part of light layering. These are usually your typical uplights. They direct light upwards to allow the light to bounce off the ceiling and into the rest of the room. It softens the light and creates a good glow. Next is accent lighting. This is the kind of lighting that will give an additional spark to the lighting of the room. You can choose to dim it or increase the glare depending on your needs.
bathroom mirror lights
black bathroom lights
modern bathroom lights